Modélisation et simulation d’un champ photovoltaïque utilisant un convertisseur élévateur de tension (boost) avec le logiciel MATLAB /SIMULINK.
DOI :
https://doi.org/10.18145/jitipee.v1i2.80Résumé
Ce travail présente une contribution pour une meilleure conception d’un convertisseur boost permettant à l’aide d’une commande de recherche du point de puissance maximale MPPT (Maximum Power Point Tracking) de retrouver la puissance maximale du champ photovoltaïque (PV) à tout moment.
En effet à partir des modèles de convertisseur boost existant dans la littérature nous avons développé une variante de convertisseur et calculé ses différents paramètres. Les simulations réalisées avec Matlab/Simulink ont permis d’optimiser la production du champ PV et d’élucider le fait que le champ PV peut fonctionner à son point de puissance maximal s’il est interfacé par un convertisseur qui recherche à tout instant la puissance maximale.
Les résultats obtenus sont en bon accord avec les résultats donnés dans la littérature.
Références
P. Sahebrao N, R. C. Prasad (2014) Design and simulation of MPPT algorithm for solar energy system using Simulink model, International Journal of Research in Engineering and Applied Sciences (IJREAS), ISSN : 2249-9210, Vol.02, Issue.01, pp.37-40.
K. Kassmi, M. Hamdaoui, F. Olivié (2007) Conception et modélisation d’un système photovoltaïque adapté par une commande MPPT analogique, Revue des Energies Renouvelables, Vol.10, No.4, pp.451-462.
C. Jena, A. Das, C. K. Panigraphi, M. Basu (2014) Modelling and Simulation of Photovoltaic Module with Buck-Boost Converter, International Journal of Advanced Engineering and Nano Technology (IJAENT), ISSN: 2347-6389, Vol.01, Issue.3, pp.18-21.
S. Sumath, L. A. Kumar, P. Surekha (2015) Solar PV and Wind Energy Conversion Systems an Introduction to Theory, Modeling with Matlab/Simulink, and the role of soft Computing Techniques, ISSN: 978-3-319-14940-0, pp.677.
S. Sholapur, K. R. Mohan, T. R. Narsimhegowda (2014) Boost Converter Topology for PV system with Perturb and Observ MPPT Algorithm, IOSR Journal of Electrical and Electronics Engineering, (IOSR-JEEE), e-ISSN: 2278-1676, p-ISSN: 2320-3331, Vol.9, Issue.4, doi : 10.9790/1676-09425056, pp.50-56.
N. Agarwal (2014) Design and Simulink of Intelligent Solar Energy Improvement with PV module, International Journal of Information and Computation Technology, ISSN: 0974- 2239, Vol.4, No.6, pp.619-628.
K. Ishaque, Z. Salam, H. Taheri (2011) Accurate MATLAB Simulink PV System Simulator based on a two-Diode Model, Journal of Power Electronics, Vol.11, No.2, pp:179-187.
S. Baig, Prof K. Gupta (2015) Performance of Mathematical Modeling of Photovoltaic module with Simulink buck-boost converter, International Journal of Engineering Sciences & Research Technology (IJESRT), ISSN: 2277-9655, Vol.4,No.6, pp.722-726.
D. Das, S. K. Pradhan (2011) Modeling and Simulation of PV Array with Boost Converter: An Open Loop Study, Thèse, National Institute of Technology, Rourkela, pp.47.
Z. Layachi, A. Borni, A. Boucharkour, N. Terki (2014) Buck-Boost converter system modeling and incremental inductance algorithm for Photovoltaic system via Matlab/Simulink, Revue des Energies Renouvelables SIENR’14 Ghardaia, pp.63-70.
Prof S. Umashankar, K. P. Aparna, R. Priya, S. Suryanarayanan (2015) Modeling and Simulation of a PV System using DC-DC Converter , International Journal of Latest Research in Engineering and Technology, (IJLRET), ISSN : 2454-5031, Vol.1, Issue.2, pp.09-16.
N. Kahoul, M. Mekki (2015) Adaptive P&O MPPT Technique for Photovoltaic Buck-Boost Converter System, International Journal of Computer Applications, ISSN: 0975- 8887, Vol.112, No.12, doi : 10.5120/19719-0773, pp: 23-27.
T. A. B. Raj, R. Ramesh (2014) Modelling and analysis of parallel converter for photovoltic applications, Journal of Theoretical and Applied Information Technology, ISSN: 1992-8645, E-ISSN: 1817-3195, Vol. 62 No.2, pp: 309-316.
A.Kalirasu, S. S. Dash (2010) Simulation of Closed Loop Controlled Boost Converter for Solar Installation, Serbian Journal of electrical engineering, doi : 10.2298/SJEE1001121K, Vol. 7, No.1, pp: 121-130.
R. Singh and M. Pandit (2013) Analysis of photovoltaic cells with closed loop boost converter, International Journal of Advances in Engineering & Technology, ISSN: 2231-1963, Vol. 6, Issue 1, doi : 10.7323/ijaet/v6_iss1, pp: 304-315.
J. Patel, V. Sheth, G. Sharma (2013) Design & Simulation of Photovoltaic System Using Incremental MPPT Algorithum, International Journal of Advanced Research in Electrical, Electronics and Instrumentation Energy, ISSN (Print) : 2320 – 3765, ISSN (Online): 2278 – 8875, Vol. 2, Issue 4, pp.1647-1653.
S. R. Nandurkar, M. Rajeev (2014) Modeling Simulation & Design of Photovoltaic Array with MPPT Control Techniques, International Journal of Applied Power Engineering (IJAPE), ISSN: 2252-8792, Vol. 3, No. 1, pp: 41-50.
J. K. Shiau, M. Y. Lee, Y. C. Wei and B. C. Chen (2014) Circuit Simulation for Solar Power Maximum Power Point Tracking with Different Buck-Boost Converter Topologies, 1st International e-Conference on Energies, ISSN : 1996-1073, doi: 10.3390/en7085027, pp: 5027-5046.
G. Varshney, D. S. Chauhan, M. P. Dave (2014) Simscape Based Modelling & Simulation of MPPT Controller for PV Systems, IOSR Journal of Electrical and Electronics Engineering (IOSR-JEEE), e-ISSN: 2278-1676, p-ISSN: 2320-3331, Vol.9, Issue.6 Ver. I, pp: 41-46.
J. Shukla, Dr J. Shrivastava (2015) Analysis of PV Array System with Buck-Boost Converter Using Perturb & Observe Method, International Journal of Innovative Research in Electrical, Electronics, Instrumentation, and Control Engineering, ISSN (Online) :2321-2004, ISSN (Print) :2321-5526, Vol. 3, Issue 3, doi : 10.17148/IJIREEICE.2015.3311, pp:51-57.
S. D. Stallon, K. V. Kumar, Dr S. S. Kumar, J. Baby (2013) Simulation of High Step-Up DC–DC Converter for Photovoltaic Module Application using MATLAB/SIMULINK, International Journal of Intelligent Systems and Applications, Vol.5, No.7, doi : 10.5815/ijisa.2013.07.10, pp: 72-82.
